A properly-functioning garage door is one thing the majority of us take for granted. However, there are certain points to always remember in relation to security and safety for you and your family.
Listed here are ten easy suggestions to maintain security and safety:
1. Do not let kids play with garage door remote controls; clarify that the remote controls aren’t toys and discuss garage door safety with them.
2. Mount garage door opener control buttons outside the reach of young children (at the very least 5 ft from the floor) and where you have got a very clear view of the garage door.
3. Visually inspect your door two or three times per year. Look at the springs, cables, rollers and pulleys for signs of wear. If any of these components seem to be damaged, speak to a qualified expert for inspection or repair.
4. Find out how to use your emergency release function. Your owner’s instruction manual gives instructions. You might need to utilize this during power outages.
5. Test the reversing mechanism on the opener by placing a 2 x 4 board or a roll of paper towels in the door’s path. If your door would not move in opposite direction after coming into contact with the object, refer to your owner’s manual and call an experienced garage door professional for repair or replacement.
6. Don’t try to remove, adjust or repair cables and springs, or anything to which such parts are connected or secured. A trained door system technician using appropriate tools and instruction must carry out repairs or adjustments. These parts are under high tension and may even cause severe injury if they are not held properly.
7. Detach the opener (pulling the emergency disconnect) in order to manually open the garage door. The garage door should really lift easily with very little resistance and ought to stay open about three or four feet over a floor. If it’s hard to perform this task, your garage door may be out of balance, causing premature wear on the opener and door. Call a competent garage door professional for adjustment.
8. While on holiday or away from home for extended periods of time, unplug the garage door opener unit or perhaps use a wall family vacation lock console security switch, which is an optional item to most openers.
9. More recent openers have photoelectric eye beams, that are mounted several inches from the floor and transmit an invisible beam over the door’s path. In case the invisible beam is broken, the garage door would quickly reverse into its completely open position even with no contact. Look into changing older openers which were not built with these safety sensors.
10. Consider purchasing a garage door opener with rolling code technology, which changes the access codes each time the transmitter is utilized to avoid code grabbing.
Author Roy Steelman White is an expert writer at Garage Door Repair Pros which is a company that specializes in garage door repair in Austin, Texas. If you need the service of a garage door specialist in Austin, you can contact with Garage Repair Pros by going to this site: Austin TX Garage Door Repair